Table of Contents
Advertisement
STEP 5
5
Press the enable button
once. The enable button
will stop flashing.
The orange lights on the
wand will illuminate.
Note:
power setting is adjusted,
you will need to press
the
continue.
STEP 6
Place the wand over the
area you wish to treat.
6
Ensure all 4 skin sensors
are in contact with the
skin (you may need to
apply gentle pressure).
The blue 'ready' lights will
illuminate.
INS T RUCT IONS FOR US E
Each
time
the
enable
button
7
to
Notes:
• Do NOT move the wand during treatment.
• The wand may become warm during use
which is quite normal.
• If contact is lost between the skin sensors
and skin during treatment, the wand's
blue lights will go off. Return to step 6.
17
STEP 7
Press
and
HOLD
treatment button on the
wand. This initiates the
treatment flash. You may
feel
a
slight
warming
of the area. During the
treatment, the flash will
emit a sound similar to a
camera shutter.
the
Advertisement
Table of Contents
