Advertisement
4. OPERATION
4.1.
Each drawer is fitted with a catch mechanism on the right hand side of the drawer underneath the handle, to open drawer push the
catch to the left to release the catch and pull the drawer open (fig.1).
WARNING! Only open one drawer at a time (fig.2) and DO NOT overload the drawers (fig.3) shows the maximum weight per drawer.
‰
4.2.
When moving the workbench, ensure that the drawers are closed and locked (fig.4) to prevent accidental opening, release the brakes
as shown in fig.5 and move the workbench using the handles and maintain full control. When the workbench has been moved to the
required location, lock the brakes.
WARNING! DO NOT move across slopes of more than 5 degrees as the workbench may tilt (fig.6).
‰
Fig.1
Fig.2
Fig.3
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
Fig.4
Fig.5
Fig.6
www.sealey.co.uk
AP2418.V2
Issue 3(L) 28/06/17
Advertisement
