Advertisement
3.Put the drip container under the unit (drawing 6).
drawing 6
4. CAUTION: the cabinet should be connected to a separate, correctly
performed electric circuit 230 +10%V, 50 Hz with the socket
equipped in the protective pin (accordingly to PBUE).
5. The socket should be protected by the 6A time delay cut-out.
6. Put the container for condensate under the draining pipe.
WARNING: it is forbidden to connect the cabinets through the extension
or distributing wires.
WARNING: ventilation gates in the housing or built-in construction
should be uncovered.
WARNING: do not use any mechanical means in order to speed-up
defrosting.
WARNING: protect the refrigerating circuit against damages.
WARNING: do not use any electric devices inside the chamber for food
products storage.
IN CASE WHEN ALL REQUIREMENTS CONTAINED IN THIS
INSTRUCTION AND CONCERNING CONNECTIONS AND
OPERATION OF THE CABINET ARE NOT MET, THE
MANUFACTURER MAY DEPARTURE FROM GUARANTEE
OBLIGATIONS.
drawing 5
8
www.horepa.nl
Our products have been manufactured in accordance with modern
technologies that ensure high performance and a long service life.
The operational temperature range - from 3 C to +7 C, at the ambient
temperature of +25 C is guaranteed.
When buying our product you also receive:
- Operational instructions
- Guarantee certificate
- Container for condensate
The unit should be reloaded either manually or by an appropriate truck
lift and always in the position of normal operation. The maximum angle
of vertical tilt should not exceed 15 . While reloading by a truck lift the
machine should be positioned on a proper platform. The usage of
platforms is not necessary when the cabinet has been packed in to a case.
Platform for transporting
Transportation of a cabinet that has not been packed into a packing case
General information
0
0
Equipment
II.Reloading
0
Platform for transporting
5
Tel: +31 226 354535
0
Advertisement
