Autel 433MHz-PL Installation Manual

PRE-PROGRAMMED
UNIVERSAL
TPMS SENSOR
433MHz-PL MX-Sensor
(Screw-in)
NOTE:
• 433MHz-PL MX-Sensor is pre-programmed for the majority of European
vehicles such as Mercedes-Benz, BMW, Audi, Volkswagen, Peugeot,
Citroen, Fiat, and Porsche, and is 100% programmable for all supported
vehicles.
• This sensor is not designed for use on vehicles driving in racing
competition. Ensure vehicles with sensor installed maintain speeds below
300km/h (186mph).
WARRANTY
AUTEL guarantees that the sensor is free from material and
manufacturing defects for a period of twenty-four (24) months
or for 25,000 miles, whichever comes first. AUTEL will at its
discretion replace any merchandise during the warranty period.
The warranty shall be void if any of the following occurs:
1. Improper installation of products
2. Improper usage
3. Induction of defect by other products
4. Mishandling of products
5. Incorrect application
6. Damage due to collision or tire failure
7. Damage due to racing or competition
8. Exceeding specific limits of the product
E m a i l : s a l e s @ a u t e l . c o m
W e b : w w w . a u t e l . c o m
www.maxitp m s . c o m
SAFETY INSTRUCTIONS
Before installing the sensor, read the installation and safety
instructions carefully. For reasons of safety and for optimal
operation, we recommend that any maintenance and repair
work be carried out by trained experts only, in accordance with
the guidelines of the vehicle manufacturer. The valves are
safety-relevant parts which are intended for professional
installation only. Failure to do so may result in the failure of the
TPMS sensor. AUTEL does not assume any liability in case of
faulty or incorrect installation of the product.
CAUTION
• The TPMS sensor assemblies are replacement or maintenance
parts for vehicles with factory installed TPMS.
• Do not install TPMS sensors in damaged wheels.
• In order to guarantee optimal function, the sensors may only be
installed with original valves and accessories provided by AUTEL.
• Upon completing the installation, test the vehicle's TPMS
following the procedures described in the original manufactur-
er's user guide to confirm proper installation.
EXPLODED VIEW OF SENSOR
Sensor Specifications
Weight of sensor without valve
Dimensions
Max. pressure range
CAUTION: Each time a tire is serviced or dismounted, or if the
sensor is removed or replaced, it is mandatory to replace with
Autel manufactured or delivered rubber grommet, washer,
screw nut, and valve core in order to ensure proper sealing.
It is mandatory to replace the sensor if it is externally damaged.
Correct sensor nut torque: 4 Newton-meters
Screw
Sensor body
Valve stem,
rubber grommet
and valve
core assembly
Washer
Screw-nut
Cap
16.5 g
approx. 51.97*29.08*22.25 mm
800 kPa