Assigning Functions To The And Keys; Turning Image Review On And Off - Casio Exilim EX-Z3 Recording Functions Manual

OTHER RECORDING FUNCTIONS
IMPORTANT!
• Increasing ISO sensitivity can cause static to appear
inside an image. Select the ISO sensitivity setting
that suits your shooting needs.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.

Turning Image Review On and Off

Image review displays an image on the monitor screen as
soon as you record it. Use the following procedure to turn
image review on and off.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "Review", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this:
Display images on the monitor
screen for about one second
immediately after they are recorded
Do not display images immediately
after they are recorded
Select this setting:
On
Off
77
Assigning Functions to the [ ] and [ ]
Keys
A "key customization" feature lets you configure the [ ]
and [ ] keys so they change camera settings whenever
they are pressed in the REC mode. After you configure the
[ ] and [ ] keys, you can change the setting assigned to
them without going through the menu screen.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "L/R Key", and
then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].