Page 1
Kosmetik | Jutta & Lothar Bode GbR ™ 1. edition 06/2019 Copying, whether in full or in part, requires the prior written permission of NORA BODE Kosmetik. Printed in Germany. NORA BODE and OXYJET GO are registered trademarks of Jutta & Lothar Bode GbR.
Traditionally, ”Made in Germany“ and NORA BODE Kosmetik manufacturing assures all of our customers of the outstanding 13. Technical data page 26 quality of all our products. The new OXYJET GO system was developed and manufactured in Germany – producing you a high 14. CE-conformity and electromagnetic compatibility page 26 quality and exclusive product.
The following sections contain important information about the correct use of your OXYJET GO device and its parts and how to avoid any danger. Please read and pay attention to all the instructions every time before the application of your device and the enclosed treatment preparations.
The OXYJET GO device is designed for facial use only. Never use the device in other areas of the body. Do not use on body openings. For hygienic reasons the device should only be used by one person. Use the device only in the manner described in this manual and observe the safety instructions.
7. Storage station Please check carefully whether the components included in the delivery are complete and undamaged (possible transport damage). If something is missing and/damaged, please contact your OXYJET GO dealer or NORA BODE Kosmetik: NORA BODE Kosmetik Glockengasse 8 D-65329 Hohenstein, Germany T.: +49 (0)6120 6484...
Clean the device and the power adapter only with a damp cloth. Never rinse under water! Always keep the OXYJET GO device and the power adapter incl. its AC adapters dry! Place the treatment products NORA BODE OXYJET 1 and 2 serum to your treatment place.
Page 7
NOTE connect the DC plug of the power adapter to the DC device packaging of the power adapter that allow you to use the OXYJET GO socket on the bottom of the device. Make sure the plug is device in many countries around the world.
LED light ring changes color from blue to red, and warning sounds are emitted. ON/OFF button: As soon as you connect your OXYJET GO device to the power Please switch off your device now, disconnect it from adapter and plug it into the socket, the ”ON/OFF“ button lights the mains and let it cool down for at least 1 hour.
Before you perform a facial treatment, you should familiarize For preparation of the treatment cleanse your face with a yourself with the use and operation of the OXYJET GO device. mild syndet, cleansing gel, foam or milk as usual. Dry your The inside of your forearm is well suited to practice handling skin carefully afterwards.
Page 10
– apply the product and pulse it in with your other eye. escaping pressure. 3. Spread 1–2 drops of the OXYJET GO 2 serum above your eyebrow, but not on the moving part of your upper eyelid. You should also keep at least 2 cm distance to the eye and treat only the region above the eye, which is bony backed.
Page 11
Put your device back in the storage station. After finishing treatment with your OXYJET GO device, you should provide your skin with your daily day/night care. In addition, Now repeat the whole procedure – apply the product and pulse it you should use the serums OXYJET 1 and 2 in the evening under your usual care.
Adjustment or modification of the equipment by anyone other than our authorized representatives will also render this warranty null and void. In the case of a valid warranty claim, the authorized OXYJET GO distributor in your country will repair or replace the defective product.
Contact the customer service. because of overheating. Disconnect the device from the power supply and let it cool down for at least 2 hours. The OXYJET GO device is defective. Contact the customer service. The main socket is defective. Contact a qualified electrician.
This symbol means that neither the device nor the power adapter may be disposed of with normal household waste (2012/19/EU). If you want to dispose of the OXYJET GO device please deliver it to the nearest electronic waste collection point for safe and efficient disposal. Correct disposal helps prevent negative consequences for the environment and human health.