Mac Afric SSCREW-001 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Mac Afric Manuals
  4. Power Screwdriver
  5. SSCREW-001
  6. Original operating instructions

Mac Afric SSCREW-001 Original Operating Instructions

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSCREW-001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mac Afric SSCREW-001

  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS 9. If operating a power in a damp location is unavoidable, use a residual current device (RCD) Use of an RCD reduces the risk of electric shock. protected supply. (For All Power Tools) NOTE: The term “residual current device (RCD)” may be replaced by the term “ground fault Failure to follow all WARNING! Read and understand all instructions.

  • Page 3: Specifications

    Power Tool Use and Care SPECIFICATIONS 17. Do not force the power tool. Use the correct power tool for your application. The correct Rated Power Input 710 W power tool will do the job better and safer at the rate for which it was designed. No-load Speed 0-4300 r/min 18.

  • Page 4: Instructions For Operation

    10. Some material contains chemicals which may be toxic. Take caution to prevent working Depth Adjustment dust inhalation and skin contact. Follow material supplier safety data. 11. The damaged tools, accessories and waste packaging should be sorted for The depth can be adjusted by turning the lock environmentally friendly recycling and in accordance with local laws.

  • Page 5: Maintenance

    Grasp the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Then install the locator by pushing it firmly back onto the gear housing. (Fig. 6) Matching of the Bit and Screw Only the bit matches the groove of the Philips head can you tighten the screw properly. Please see the following chart : Bit No.
  • Page 6 ※Damaged cord must be replaced by a special cord purchased from authorized service Gear Housing Cover Capacitor center. Damping Washer Cord ※To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or Ball Bearing Cord Guard adjustment should be performed by authorized centers, always using original replacement Washer Strain Relief parts.

Table of Contents