Polaris Connect App Setup; Base Radio Setup; Setup Base Position; Rover Radio Setup - Polaris S100 Quick Manual

Polaris Connect App Setup

Base Radio Setup

Setup Base Position:

Go Base page,
1
Set Position by
survey duration
2
Or Set Position by
entering coordinates
manually
3
Press Start,
start to broadcast
If want to log base
RTCM data for PPP
processing, do page-8
procedures before
above #3 Press Start.

Rover Radio Setup

1
2
After Polaris Connect
App has been setup for
both base radio and
rover radio, the S100
rover will be able to
receive S100 base data
transmitted over radio.
Polaris Connect App
will exist after setting
up the Base Radio.
Polaris Connect App
stays after setting up
the Rover Radio. One
can keep Polaris
Connect App running in
background and use 3
party GIS App.
If Base position is set by
Automatic Survey, one can
check coordinates on the
S100 Rover on the Rover
page
rd
3