Operation - Westfalia Garten Meister 95 88 11 Original Instructions Manual

Intended Use
The pulse sprinkler is intended for irrigation of areas with clear water. It is not
suitable for the application of pesticides or fertilizers.
Installation and Operation
 Set up the pulse sprinkler at the desired location and connect it to a water
source with sufficient pressure, such as the water supply network, using a
hose and the water connection (5).
 Regulate the swivel range of the sprinkler with the stops (4). If you want to
operate the sprinkler in a full circle, fold the stop bracket (3) upwards.
 Regulate the throw and jet shape with the deflector plate (1) and the jet
disturbance screw (2). The throw also depends on the available water
pressure.
 Switch on the water supply and readjust the throw if necessary.
Storage and cleaning
 Store the pulse sprinkler in a dry, frost-proof place. Freezing residual water
can destroy the device.
 Do not use any aggressive chemicals or abrasive cleaners to clean the device
in order not to damage the surfaces.
Technical Data
Irrigation diameter:
Irrigation area:
Rotation angle:
Operating pressure:
Water connection:

Operation

approx. 20 m)
approx. 315 m2
30 - 270 °
2 - 8 bar
½"connector
5