Page 1
AVD-76UX6SEL CEILING AVD-96UX6SFL DUCTED AVD-76UX6SEH TYPE AVD-96UX6SFH P00424Q ORIGINAL INSTRUCTIONS...
Page 3
Manufacturing number and manufacturing year: refer to model Nameplate. Notes: This declaration becomes invalid, if technical or operational modifications are introduced without the manufacturers consent. Hisense Italia S.r.l. is authorised to Compile the Technical Construction File. Ad. : Via Montefeltro 6A, 20156 Milano. Name, Surname Position/ Title...
Therefore, the utilization of the unit other than those indicated in these instructions is not recommended. Please contact your local agent, as the occasion arises. Hisense's liability shall not cover defects arising from the alteration performed by a customer without Hisense's consent in a written form.
Page 8
Children should be supervised that they do not play with the appliance. The appliance should not be installed in the laundry. Table 2.1 Line-up of Indoor Unit Capacity(10 Btu/h) AVD-76UX6SEL(H) AVD-96UX6SFL(H) Model...
Page 10
Regarding the instructions of Wired Remote Control Switch or Wireless Remote Control Switch,read the operation manual attached to the control switch.
Page 17
Flaring Dimension (Only for R410A or R407C) Perform the flaring work as shown below. Diameter -0.4 R410A R407C 6.35 13.0 9.53 13.2 16.2 12.7 16.6 15.88 19.7 19.4 23.3 19.05 (*)It is impossible to perform the flaring work with 1/2H material. In this case, use an accessory pipe(with a flare).
Page 21
Maximum Current EN60 335 -1 EN60 335 -1 Capacity 2.5mm 0.75mm The wire sizes marked with *1 in the above table are selected at the maximum current of the unit according to the European Standard, EN60335-1.Use the wires which are not lighter than the ordinary polyvinyl chloride sheathed flexible cord (code designation H05VV-F).