Maintenance - Pelgrim PRS2 Installation Instructions Manual

MAINTENANCE

Ordinary maintenance
Warning!
Before any cleaning or maintenance operation, disconnect the appliance from the main
power supply.
• The active carbon filters capture the odours present in the cooking fumes.
The air is reintroduced into the kitchen after having been purified. Active charcoal filters
must not be washed but must be replaced when the corresponding warning appears or at
least 3-4 times a year.
Request the replacing filters to the manufacturer.
▷
Disconnect the power supply of the appliance before proceeding with any maintenance
▷
operation
To replace the active carbon filters, detach the aluminium grid and use the handle to
▷
disengage the filters from the joint and extract it from the box.
To reinsert the filters, carry the same operation backwards
▷
Discontinuation and disassembly
Discontinuation
• Discontinuation means the definitive stop of the operation and the disassembly or the
appliance.
• After discontinuation, the appliance can be installed on another furniture, privately resold or
disposed of.
Warning!
For discontinuation it is necessary to switch the appliance off and disconnect the power.
Warning!
Electrical disconnection and must be undertaken only by qualified service staff.
Disassembly
• Disassembly requires that the appliance is accessible for disassembly and has been
disconnected from the power supply.
• To do so, you need to:
loose screws and fixing brackets;
▷
remove any silicone seals;
▷
disconnect the motor and the channel from the hob.
▷
EN 7