Advertisement
Outputting Digital Piano Notes
Through an Amp or Audio
Equipment
You can connect audio equipment or a music amplifier to the
Digital Piano and then play through external speakers for
more powerful volume and better sound quality.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes are distorted when they are sounded
from external audio equipment, lower the Digital
Piano's volume setting.
Connection requires commercially available connecting cords,
supplied by you.
Audio amplifier AUX IN jacks, etc.
Pin plugs
RIGHT (Red)
LEFT (White)
■ Connecting to Audio Equipment (Figure
Use commercially available cables to connect the external
audio equipment to the Digital Piano's LINE OUT jacks as
shown in Figure
. LINE OUT R jack output is right channel
sound, while LINE OUT L/MONO jack output is left channel
sound. It is up to you to purchase connecting cables like the
ones shown in the illustration for connection of audio
equipment. Normally in this configuration you must set the
audio equipment's input selector to the setting that specifies
the terminal (such as AUX IN) to which the Digital Piano is
connected.
LINE OUT jacks
(Standard jack (6.3mm))
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2
■ Connecting to a Musical Instrument Amplifier
(Figure
Use commercially available cables to connect the amplifier to
the Digital Piano's LINE OUT jacks as shown in Figure
LINE OUT R jack output is right channel sound, while LINE
OUT L/MONO jack output is left channel sound. Connecting
to the LINE OUT L/MONO jack only outputs a mixture of both
channels. It is up to you to purchase a connecting cable like
the one shown in the illustration for connection of the
amplifier.
Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Piano for playback.
■ Minimum Computer System Requirements
The minimum computer system requirements for sending and
receiving MIDI data are shown below. Check to make sure
that your computer complies with these requirements before
connecting the Digital Piano to it.
● Operating System
Windows 8.1 *
Windows 10 *
macOS (OS X/Mac OS X) 10.7, 10.8, 10.9, 10.10, 10.11,
10.12, 10.13, 10.14, 10.15, 11.0
*1 Windows 8.1 (32-bit, 64-bit)
*2 Windows 10 (32-bit, 64-bit)
● USB port
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
• For the latest news about supported operating systems,
visit the website at the URL below.
https://support.casio.com/global/en/emi/manual/PX-S1100/
)
)
1
2
EN-5
Hide quick links:
Advertisement
