Advertisement
4. OPERATION FIG.1
NOTE:
Make sure threads are clean before using bearing puller for the first time.
4.1.
Unscrew the jaws enough on the threaded bar, that the cone is not pressing on the jaws.
4.2.
Insert the jaws into the middle of the bearing.
4.3.
Hold the jaws and screw the threaded bar down so that the cone presses on the jaws.
4.4.
Hold the nut on top of the crossbar with a spanner and wind the puller unit up.
5. MAINTENANCE
5.1.
Keep all items clean and lightly oiled. Keep all threads free from grit and lubricate the thread regularly.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
MS0621 Issue 1 02/11/2020
Advertisement
