Advertisement

Quick Links


D
Y
^
'
s
www.callrecordermynah.nl
Downloads Available at
Tel 0497-550260
This guide is Copyright ©
2010 – all rights reserved.
BPS International BV

Introduction

Congratulations on your purchase of your Call Mynah, the
only Universal Call Recorder for ALL Mobile Phones!
Call Mynah is part of an exciting range of cost-effective
Digital Call Recorders from Intelligent Recording.
This quick reference guide will take you through the
installation and setup of Call Mynah and help you begin
recording your calls quickly.
Important Note: There are various support manuals &
programs in the memory of the Call Mynah. To view and
install these, please see the 'Connecting To Your PC'
section of this Quick Start Guide or you can download the
latest versions from the Call Mynah web site
www.CallMynah.com
where you can register your Call
Mynah and receive 'Live Chat' technical support to help
get you started.
Contents
Your Call Mynah package will contain:
Call Mynah Device
USB style power adapter
Mini USB Lead (to charge Call Mynah and to
connect to a PC)
Headset with answer switch
Quick Start Guide (this document)
If you do not have all the above items, please consult your
reseller or Intelligent Recording on the contact information
provided on the front page.
Before You Start!
You must fully charge your Call Mynah. You can do this by
connecting the mini USB lead into Call Mynah and the
power adapter or by connecting Call Mynah to the USB port
on any PC.
Call Mynah will take approximately 5 hours to fully charge.

Call Mynah Layout

To turn Call Mynah on/off simply press and hold the 'End' key
for a few seconds.
Note – If Call Mynah is on, the LCD may go blank to save
power, simply press the Record key to restore the display.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Call Mynah and is the answer not in the manual?

Questions and answers

Summary of Contents for BPS Call Mynah

  • Page 1 Call Mynah to the USB port on any PC. Note – If Call Mynah is on, the LCD may go blank to save power, simply press the Record key to restore the display. Call Mynah will take approximately 5 hours to fully charge.
  • Page 2 Make sure item 3 ‘Discover’ is on (you may wish to Select ‘3 Settings’. change the default Bluetooth PIN too – default is Connecting Call Mynah to your PC via USB will allow you to: Select ‘5 Date & Time’. ‘0000’).

Table of Contents