Advertisement
Quick Links
Assembly Instructions
Vegecover - Medium
IMPORTANT
** Ensure longer ends of arch poles are at bottom
*** Assemble on a hard surface
Ensure all pieces are fully inserted into plastic connectors. Lay the
frame on its side using the ground to gain more leverage, you may even tap
lightly with a mallet or hammer.
To check if they are fully inserted place the frame on top of the assembled
Vegepod, the frame should sit directly over the 'hinge clips' or 10mm smaller
than top rim of Vegepod.
Trademark
Patent
Copyright
Support
Email: support@vegepod.com.au
Phone: 1800 428 431
.
Advertisement
Summary of Contents for Vegepod Vegecover-Medium
- Page 1 To check if they are fully inserted place the frame on top of the assembled Vegepod, the frame should sit directly over the ‘hinge clips’ or 10mm smaller than top rim of Vegepod. Trademark...
- Page 2 Cable tie (6) - hinge clip (6) - ratchet clip (1) string Sprinkler Line (1) Hose connection (1) Before attaching greenhouse material Watering System Attach the 2 pieces of black polypipe together 1. Connect the hose outlet to the main sprinkler line by pushing the elbow into the open end of the black polypipe.
- Page 3 6. Remove several clips along one side from top of panels by sliding them out of the Vegepod garden container rim. Push in Hinge Clips on both ends ensure clips slides over the back lip to ensure it cannot slip back out (require to push hard).