Page 1
Shell 10 Slim Bolt-Through Counter Mount Instructions Contents: Applicable To: Applicable To: Items Supplied / Required 018S_10_120 A - Mount Installation B - Enclosure Set Up Items Supplied A - Rear Enclosure and Pillar J - 90/130° Swivel Ring B - Tablet Tray...
Page 2
Shell 10 Slim Bolt-Through Counter Mount Instructions Applicable To: 018S_10_120 Counter Mount Installation A1 - Surface Check A2 - Remove Mount Fasteners Min >20-75mm< Max Surface Thickness Tip: If connecting your tablet for charging, Counter surface must consider the distance to...
Page 3
Shell 10 Slim Bolt-Through Counter Mount Instructions Applicable To: 018S_10_120 Counter Mount Installation Trim to length if necessary Trim pillar thread to length if necessary Fit L to pillar (A) and place A through the swivel ring and hole in the counter surface.
Page 4
Shell 10 Slim Bolt-Through Counter Mount Instructions Applicable To: 018S_10_120 Enclosure Set Up B1a - Remove Tablet Cassette Push up C and it will release from A. Lift C clear of A. Unlock your Shell 10 Slim using D on the lock located on the back of A.
B7 - Plug in your Tablet Place Tablet Cassette (C) back into Rear Plug in your tablet’s power. Enclosure (A) just Your Shell 10 Slim is ready for above centre. use. (If you have an open front counter surface go to step B8).