Advertisement
Table of Contents
Iridium GO! Quick Start Guide
Congratulations on the purchase of your new Iridium GO! Now that you have your service up and running
with Roadpost, we wanted to provide you with a few quick steps to get your Iridium GO! device ready for
use:
1.
STEP ONE: Set up the Iridium GO! device
2.
3.
4.
5.
STEP ONE: Set up the Iridium GO! device
Begin setup of your new Iridium GO! device by ensuring the SIM card is inserted, the battery is installed
and charged, and the battery cover is properly attached.
1
Advertisement
Table of Contents
Summary of Contents for Roadpost Iridium GO
- Page 1 Iridium GO! Quick Start Guide Congratulations on the purchase of your new Iridium GO! Now that you have your service up and running with Roadpost, we wanted to provide you with a few quick steps to get your Iridium GO! device ready for use:...
- Page 2 Turning your device on: • Use of Iridium GO! requires that the swivel antenna is raised to the upright position during operation. Once raised, Iridium GO! will automatically complete the power up sequence in approximately one minute and will begin registration with the Iridium network.
- Page 3 Important: Always confirm you are connected to your Iridium GO! Wi-Fi network prior to use of the Iridium GO! application. TIP!: The Iridium GO! Wi-Fi is an open (visible) network with no password. Iridium GO! Wi-Fi can be Iridium GO! User Manual.
- Page 4 Your primary and secondary emergency contacts. o Any additional useful medical information (allergies, etc.). 5. After registration, access the SOS settings in the Iridium GO! app, select “Use”, and enter the 5 digit authorization code provided by GEOS and then submit.
Need help?
Do you have a question about the Iridium GO and is the answer not in the manual?
Questions and answers