Faults And Troubleshooting; Cleaning - Beem Shark de Luxe Instruction Manual

7. Faults and troubleshooting

Faulty function
Drive motor not
running
Appliance switches
off abruptly
Fuse blows

8. Cleaning

WARNING
Danger of injury
Always pull out the mains plug before cleaning.
DANGER
Danger of death from electric shock
Never immerse the appliance in water or other fluids.
CAUTION
Material damage
Never use aggressive or abrasive cleaning agents.
 Switch the appliance off and unplug.
 When disassembled, the grinder-housing (not the motor unit!) can be rinsed.
 For disassembling push the release button button and remove the grinder housing
from the motor unit while turning slightly.
 Rinse all accessories only with lukewarm water and washing up liquid, never in the
dishwasher.
 Therefore please put all parts of the mincing unit for at least 10 Minutes in warm
water.
 Then clean all parts with a brush and rinsing agent. Clean thoroughly the inside of
grinder housing especially also around the plastic gear and the inside of screw ring.
 Then rinse again with fresh water.
 Wipe the motor housing with a damp cloth only.
 Dry all parts thoroughly.
 Re-assemble the appliance.
 The power cord can be stored in the base of the motor unit.
 Store the appliance in a dry, well ventilated place.
THE MOTOR UNIT SHOULD NOT BE IMMERSED IN WATER OR COME INTO
CONTACT WITH WATER. CLEAN WITH DAMP-CLOTH ONLY.
BEEM – Elements of Lifestyle
Possible reason
Mains plug not plugged in
No electricity supply
Appliance overheated
Appliance overheated
Appliance is faulty
Too many appliances connected
Remedy
Connect the appliance to the
mains
Check the fuse/plug
Pull out the mains plug and
wait at least 60 minutes
Pull out the mains plug and
wait at least 60 minutes
Inform the after-sales service
Reduce number of appliances
using the circuit
Seite/Page/ 19/24