Turf-Tec MS6-W Manual

Turf-Tec Digital Moisture Sensor
a percentage of soil moisture that is held within the air space
in the soil.
This state of the art unit is designed to work in all soil types and salinity ranges.
The probes are also easily replaceable. The Turf-Tec Digital Moisture Sensor
uses a newly designed electrical conductivity sensing circuit that gives quick and
reliable readings of soil moisture. With years of science behind the sensing
results, there is no easier way to test for soil moisture.
MS6-W - Turf-Tec Digital Moisture Sensor
Replacement parts:
MS6-P001- Turf-Tec Digital
Moisture Sensor probes (Set 2)
Turf-Tec International Digital Moisture Sensor - Copyright 2011
From the inventors of one of the first moisture
sensors available to the turfgrass industry comes
the new Turf-Tec Digital Moisture Sensor.
The Turf-Tec Digital Moisture
Sensor has been developed
to determine soil moisture in
the soil profile. The unit has
an adjustable foot which
allows you to determine moisture at
the one inch, two inch, three inch or
four inch depth without changing
probes. This will insure you can
determine the soil moisture above,
below and in the turfgrass rootzone
for maximum water savings and plant
health.
Simply slide the adjustable foot
to the desired depth, insert the
Turf-Tec Digital Moisture
Sensor into the soil and press
the "Read" button near the
digital display. The read out is
Page 1 - www.turf-tec.com