Page 1
LED Manual Control Panel User Manual Model: 810A Operating Voltage: DC24V / DC36V / DC48V Functions: Power Switch (Electric Door Lock) Battery Level Indication Three-Gear Motor Power Control 6km/h Inching Control Light Switch Auto-Hibernation after 10min Idleness 1. Exterior Parameters Casing Material: ABS Workable Temperature: -20 ℃...
Page 2
2. User Instructions Connections: 1. Connect the red wire to the positive. 2. Connect the black wire to the negative. 3. Connect the blue wire to the controller of the electric door lock. 4. Connect the green wire to the controller of the motor power intensity inching control wire.
Page 3
button for the third time, the motor power indicator will be set back to LOW, and the output power will be reset to 1V. 4. 6km/h Inching Control Power on the panel and press the 6km button in any status to set the output voltage of the motor power intensity wire to 4V, and the output will be reset to the original when the button is released.