Subscribe to Our Youtube Channel
Summary of Contents for Poweradd T-M6
- Page 1 User Manual (T-M6) Thanks for your purchasing Poweradd TWS (Wireless Bluetooth Earbuds).
-
Page 2: Specification
Charging contacts Charging contacts Charger port Charging case (USB Type-C) battery indicator light Specification Model: T-M6 Chipset: Airoha1536U Bluetooth version: Bluetooth 5.0 Support agreement: HFP/HSP/A2DP/AVRCP System compatibility: IOS/Android/Windows Bluetooth distance: ≥10M Speaker unit: φ6MM,16Ω moving coil unit Battery: Earphone 3.7V / 50mah Charging box: 3.7V / 500mah... - Page 3 Earphone Function Right Left Prompt Indicator light Function Icon Operation Method Open the charging box and the After red light goes on, Power Power on headset will start automatically blue light flashes once Put headset into charging box, Power Red light will go out Power off close charging box, in one second...
-
Page 4: Headphones On/Off
Usage Of Charging Box Charge the headsets with a charging case a. Apple and some Android phones can check the headsets battery, When the headphone battery is low, the headphone will prompt "low battery" every 2 minutes, and the red light flashes. b. -
Page 5: Bluetooth Connection
(or automatically start and pair) Prompt sound "power on" 2. Match a cell phone Bluetooth Open the phone's bluetooth Cellphone name and search for "T-M6" click Open detection connect, and when you suc Paired device ceed, it says "pairing successful"... -
Page 6: Package Contents
2. To ensure great connection performance, please keep the bluetooth distance within 10m. 3. If you can not find “T-M6” in bluetooth on your music device, please remove all recorded bluetooth pairing data, then turn on bluetooth again to search for “T-M6”. - Page 7 Manufacture information: Company name:Shenzhen Hangshi Technology Co.,Ltd Address: Hangshi Technology Park,Democracy West Industry Area, Shajing Town,Bao'an District,Shenzhen,China.
Need help?
Do you have a question about the T-M6 and is the answer not in the manual?
Questions and answers
One ear bud not working
One earbud of the Poweradd T-M6 may not be working due to several reasons:
1. Not Automatically Reconnecting – If the earbud does not reconnect automatically, it may need to be manually rematched. To do this, long press the left and right earbud buttons for 3 seconds to turn them on, and they should pair automatically.
2. Battery Is Drained – The earbud may not have enough charge. Place it in the charging case and ensure it is charging properly.
3. Connection Interruption – If there is an obstruction or interference, the connection may be unstable. Try reconnecting the earbuds to the device.
4. Improper Power-On – Ensure that the earbud is properly turned on by pressing the button for about 3 seconds until the blue light flashes and the prompt sound says "Power on."
If these steps do not resolve the issue, resetting or re-pairing the earbuds may be necessary.
This answer is automatically generated