Page 1
Installation and Operation Manual PENTAGRAM horNET Giga PCI (P6111-1) The latest versions of manual, drivers and applications are available on www.pentagram.eu 2008-04-16...
Giga PCI (P6111-1) Introduction Thank you for purchasing a PENTAGRAM network interface card! We are convinced that it will meet your expectations and will provide a reliable experience. The purpose of this manual is to explain the installation and operation of the card, and to provide useful information on certain aspects of computer networks.
Giga PCI (P6111-1) Features • One port with automatic MDI/MDI-X switching, enabling the card to be connected quickly to a switch or another computer. • Jumbo Frames support to ensure high performance in new applications which require large frame transfers (graphics and video editing applications).
Giga PCI (P6111-1) Installation Installing the card in your computer Ensure that you have sufficient workspace on your desk to perform the installation, and then proceed as follows: Turn off your computer (it is recommended to switch off the power supply or disconnect the power cord from the computer).
Giga PCI (P6111-1) Driver installation The CD supplied with the card contains drivers for popular operating systems, i.e. for the Windows family of systems and for Linux-based systems (all stable 2.4.x and 2.6.x kernels). Driver installation under Windows is explained below.
Giga PCI (P6111-1) Cabling To ensure that the device can transfer data at the desired speeds, networking cables must meet appropriate standards. 1000 Mbps: Data transfer at 1000 Mbps requires Cat. 5 cables (Cat. 5e recommended) with all four wire pairs terminated in an RJ-45 connector. For a straight-through cable, both connectors must be terminated according to the EIA/TIA 568B wiring standard.
Page 10
Giga PCI (P6111-1) An example of the simplest usage for the command is as follows: ping computer2 where computer2 is the name of the computer with which you want to check connectivity. If everything works correctly, the system should respond with a message similar to the one below.
Giga PCI (P6111-1) Glossary of key terms The purpose of this section is to explain some of the most important concepts related to computer networks. Ethernet Ethernet is a highly popular networking system developed by Xerox. Depending on version, it supports data transfers at 10 Mbps, 100 Mbps or 1000 Mbps.
Page 12
Giga PCI (P6111-1) • Star/Bus Configuration This standard combines two topologies, where groups of workstations connected into stars are linked in the same manner as individual workstations on a bus. Protocols • TCP/IP TCP/IP (Transmission Control Protocol/Internet Protocol) combines two protocols, i.e.
Page 13
Giga PCI (P6111-1) • DNS (Domain Name Service) DNS is a service available on TCP/IP-based networks which assigns easy-to-remember names (e.g. computer.domain.com) to numeric addresses (e.g. 198.168.148.144). Programs such as Telnet, SMTP or FTP use DNS to locate an IP address on the basis of the name provided.