Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for IGS 218A
- Page 1 Operation and Maintenance Manual MNL90009 08/31/05 Rev. F MODEL 218A/228A...
-
Page 3: Installation
Read this manual. Keep it with your machine; it's your key to proper operation and IGS shall not be liable for the injury, loss or dam- lasting service. age, direct or consequential, arising out of the use or the inability to use the product. -
Page 4: Controller Operation
THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY Operation Operation Timer/Temperature Control 1. It is recommended that you review the "How to Apply Instructions" (on our Product Information Sheet) before beginning heat sealing operations. 2. Turn the power on by pressing the POWER button on the controller. -
Page 5: Additional Notes
THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY ADDITIONAL NOTES: Temperature NOTE Fahrenheit/Centigrade (Celsius) Conversion The temperature controller can be programmed to display either °F or °C. To change: Press the MODE button until the temperature is displayed, then push and hold the SET button for 10 seconds. -
Page 6: Hot Surface
THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY Safety Summary International Symbols WARNING In case of power cord damage, do Power Off not attempt to repair or replace the power cord. Contact the manufac- turer or the local distributor. WARNING Power On Avoid touching hot surfaces while... -
Page 7: General Maintenance
THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY Preventive Maintenance Suggestions General Maintenance The IGS heat seal machines are relatively It is recommended that you have the following maintenance free. For long trouble-free life, the items available: following preventive maintenance should be A. - Page 8 OP-2 +12V OP-1 WHITE 12 Vac TEMPERATURE 12 Vac (BLUE-EUROPE) INPUT GN/YEL CONTROL GREEN TIMER SENSOR (GN/YEL-EUROPE) START BLUE MICRO GN/YEL SW\ITCH GREEN BROWN BROWN HEAT PLATEN 12 Vac GN/YEL 230 Vac BLUE 218A 228A Wiring Diagram - 10/08/04 TRANSFORMER...
- Page 10 MODEL MODEL MODEL MODEL 218A 218A 228A 228A NO PART NAME 120V AC 240V AC 120V AC 230V AC SHROUD, HEAT MPSS218 MPSS218 MPSS228 MPSS228 SCREW, PAN HD #10 x 1.00 LG MPSS143 MPSS143 MPSS143 MPSS143 INSULATION, FIBERGLASS MPSP251 MPSP251...
- Page 11 MODEL MODEL MODEL MODEL 218A 218A 228A 228A NO PART NAME 120V AC 240V AC 120V AC 230V AC 92 NUT, HEX 6-32 MHNH632 MHNH632 MHNH632 MHNH632 93 WASHER, SHIM #6 (.031) MH311150019 MH311150019 MH311150019 MH311150019 94 SPACER, LG NYLON 0.166 ID x 1/4 IN...
- Page 12 ® 13925 E. 166th Street • Cerritos CA USA 90702-7900 Service: (800) 426-3609 • (562) 861-2566 • Sales: (800) 421-6971 (562) 404-3000 • Fax: (562) 404-3010 • http://www.instagraph.com...
Need help?
Do you have a question about the 218A and is the answer not in the manual?
Questions and answers