GCE Vectrex Spike Manual page 5

Setting Up
+ Make sure the console power cord is plugged into a 120
volt AC 60 cycle electrical outlet.
Check to be sure the plug for the built-in control panel is
+
firmly seated in the control panel outlet on the right.
MAKE SURE THE CONSOLE IS TURNED OFF BEFORE
+
INSERTING THE CARTRIDGE. Insert the cartridge into the
slot with the label side up. Be sure it is firmly inserted to
the guideline marked on the cartridge.
+ Insert the screen overlay behind the tabs at the top and
bottom of the screen.
+ Turn the Off/On/Volume Control to the ON position (clock-
wise). You will see the Vectrex title for a few seconds, then
the name of the game.
+ Adjust the volume control to the desired listening level.
5