Download Print this page

Sealey BS103 Quick Start Manual page 2

Workshop bicycle stand

Advertisement

DO NOT exceed the maximum extension height of shaft (B), there is a mark on the shaft.
8
4.11.
Always ensure that after repositioning the cycle on the stand, that the stand/cycle are stable before carrying out any work.
4.12.
After use, clean the stand, if required, with warm water and then dry with a clean cloth. Store the stand in a safe, dry, child proof
location.
Fig.2
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
BS103 | Issue:3 (2,F) 04/06/20

Advertisement

loading