Advertisement
Available languages
Available languages
Quick Links
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
•
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT
•
IN SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Install the Lamp. This fixture is rated for 60 watt type A
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL206201S, HL206201L ORION TABLE LAMP
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
•
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
STEP 3.
Place Glass shade onto base and secure it.
STEP 4.
Plug cord into a qualified socket of properly rated
voltage.
STEP 5.
On/Off switch installed on cord .
Advertisement
Related Manuals for mitzi ORION HL206201S
Summary of Contents for mitzi ORION HL206201S
- Page 1 Plug cord into a qualified socket of properly rated lamp. voltage. DO NOT EXCEED RECOMMENDED WATTAGE STEP 5. On/Off switch installed on cord . CLEANING Please clean with a soft, dry cloth ONLY! Do not use cleaning products ASSEMBLY AND MOUNTING DIAGRAM www.hudsonvalleylighting.com/mitzi| #mymitzi...
- Page 2 PAS 5. Le variateur est installé au cordon. NETTOYAGE A nettoyer UNIQUEMENT avec un chiffon doux et sec! Ne pas utiliser de produits de nettoyage SCHÉMA D’ASSEMBLAGE ET DE MONTAGE ABAT-JOUR EN VERRE AMPOULE FICHE BASE VARIATEUR www.hudsonvalleylighting.com/mitzi | #mymitzi...
Need help?
Do you have a question about the ORION HL206201S and is the answer not in the manual?
Questions and answers