Fadisol C-0630 Quick Start Manual

Read carefully and understand these instructions before connecting the apparatus.
Keep this handbook for future references.
DESCRIPTION
Did you know that you can save energy and money controlling the temperature of the shower? This thermometer shows it.
Install it between the pipe and the head of the shower. When water passes through the thermometer, the digital screen will
show you the water temperature shower? This thermometer shows it.
DESCRIPTION
STEP 1
Unscrew the tube of the shower head,
turning it in the anti-clockwise
le tournant dans le sens contraire des
ETAPE 4
aiguilles d'une montre
Unscrew the tube of the head of the
shower, in the turning in the contrary
direction of needles of a watch Unscrew
the tube of the head of the shower, in the
turning in the contrary direction of
needles of a watch
Note: A fast rotation or an incorrect operation can damage or affect the use life of the unit.
Important :
DIGITAL THERMOTER FOR WASHER
STEP 2
Place the thermometer between the
head and the pipe. You have to put a
silicone joint (included in the kit)
at each thermometer's extremity
Place the thermometer intercalated
between the head and the pipe. You
will have to put a silicone joint (included
in the kit) at each end of the
thermometer
Place the thermometer intercalated
between the head and the pipe. You
will have to put a silicone joint (included
A. Open the wáter tap
in the kit) at each end of the
Firstly cold water
1. For your own security and to protect this apparatus, open
thermometer
2. If the reading is above the row of the thermometer, the screen
Then hot water
B. Close the water tap
For your own security and to protect this apparatus, firstly close the warm water
chaque extrémité du thermomètre

For another installation type consult a professional.
 If you install the thermometer close to the warm water tap, the
temperature can be very high and it can distort it for the
 read on the screen, and damage the apparatus.

The maximum admitted weight by the thermometer must be
evaluated by a professional. - Turn off strongly the water tap to
cause a "water hammer". This sound indicates that the fast
modification of flow generate a sudden pressure increase in the
water piping. This can affect the use life of the unit.
 Do not use this unit on a head of shower which is equipped with a
valve of opening/closing (ON/OFF). By closing this valve without
previously turned off the water tap, you will create a very
important pressure in the pipe which could damage the unit.
 Do not submerge the thermometer in water.
STEP 3
Turn, only on the right side, to
adjust the sight angle.
ajuster l'angle du viseur
initially cool water and then the heat
will indicate "HI" and if it is with the lower part it will indicate
"LO"
This unit offers the IPX4 protection degree.
Do not to submerge the thermometer in water
C-0630