Installation - Rexing B1 User Manual

Installation

Power Supply
Batteries Installation
Please install batteries into the device
before using.
1
Open the battery cover on the
back of device.
2
Insert 6xAA batteries into the
battery compartment. Make sure
the polarity is correct.
3
Close the battery cover.
Note:
• NEVER INSTALL DIFFERENT
TYPES OF BATTERIES or NEW
AND OLD BATTERIES in the
product at the same time.
• Anytime you load or unload
batteries, make sure that
the camera is OFF. If using
external power source, do
not remove internal batteries.
Inserting Memory Card
1
Please prepare a Micro SD
card(up to 32GB) in advance.
2
Open the card slot cover, you will
see the card slot.
3
Insert the Micro SD card into
the slot. Make sure the direction
is right. Never insert the card
forcibly.
4
Format the Micro SD card,this
can improve the battery life and
shutter speed.
5
To remove the card from the
memory card slot of the device,
press the edge of the memory
card in gently, the card will pop
out. Then remove the card.
Note:
• Be sure the camera's power is
switched OFF before inserting
or removing SD cards or
batteries.
• Camera will not operate
without an SD memory card
installed.
9