Advertisement
Quick Links
Advertisement
Related Manuals for Spectrum 88005
Summary of Contents for Spectrum 88005
- Page 1 Bus Station H O s c a l e i t ys enes a s s e m b l y i n s t r u c t i o n s Item #88005...
- Page 2 roof and sidewalk detailing accessories Your kit is complete with Roof and Sidewalk Detailing Accessories. Some, such as Roof Vents Parts (11) and Fire Hydrants Parts (8), do not require assembly. Others require assembly as shown. After assembly, position the accessories on or around your building as required. Suggested locations: Building Roof Top Sidewalk...
- Page 3 READ PRIOR TO ASSEMBLY To enhance the aesthetic and realistic qualities of this building, parts have been designed and manufactured in scale proportions. As a result, some parts are fragile and require care in assembly. Therefore... easy does it. As with any model builder kit, a degree of patience is required to achieve the best results.
- Page 4 roof assembly and sign To assemble the Roof, apply glue sparingly to the locator tabs on Wall. Assemble the Parts and Sub-Assemblies In Sequence: Three Roof Support Beams (17) into locator holes on Base (1). 2. Main Roof (12) to Roof Support tabs. Seated properly, the roof rests on the Roof Support tabs on all Walls.
- Page 5 main wall assembly to base When assembling Walls, carefully align Wall tabs with each Wall. Dry fit each part before applying glue. Apply glue sparingly on the assembly tabs and lower back side edge of Wall. Assemble the Parts and Sub-Assemblies In Sequence: Wall (6) to Base (1).
- Page 6 brick wall, entrance roof and trim assembly When assembling Brick Walls, carefully align Wall tabs with each Wall. Dry fit each part before applying glue. Apply glue sparingly on the assembly tabs and lower backside edge of wall. Assemble the Parts and Sub-Assemblies In Sequence: Wall (13) to Base (1).
- Page 7 back door, walls, and vents assembly When assembling the Back Walls, carefully align Wall alignment tabs with each adjoining Wall. Apply glue sparingly to the alignment tabs and lower backside edge of Wall. Assemble In Sequence: Back Door (18) to Wall (14). 2.
- Page 8 window frames and clear parts assembly to walls Assemble all parts to BACKSIDE of the Walls. When properly positioned, the Window Frames fit solidly into wall window opening; the Clear Part(s) fit onto locator tabs extending from Wall and trap the windows in place. If desired, use glue on Windows and Clear Parts. Assemble In Sequence: Window Frames (19) and (23) into Wall (3).
- Page 9 sidewalk assembly Depending on the location of this building on your layout, you have the option of placing Sidewalks on one, two, three, or four sides of this building. Cut each Sidewalk section (88) to the proper length for an appropriate fit. Use Corners (89) to connect the straight Sidewalk section (88). NOTE: The sidewalks included with this kit are compatible with the Street and Sidewalk System made by Wm.
- Page 10 Decals Custom decals have been included with your kit and can be applied at your discretion. Application directions are provided on the back of the decal envelope. Damaged or Missing Parts: We take great care in ensuring that all parts are present and in good condition. In the unlikely event that a part is missing or damaged, our Service Department will be happy to assist you.
Need help?
Do you have a question about the 88005 and is the answer not in the manual?
Questions and answers