Table of Contents
Advertisement
Quick Links
11/2/2020
Home (/s/)
TECHNICAL SUPPORT (/s/contactsupport)
ROUTING
(/S/TOPIC/0TO38000000Q3MCGA...
COR IBR200 IoT Router Quick Start Guide
Oct 28, 2020
Knowledge
•
Content
IBR200 IoT Router Quick Start Guide
Introduction
This document provides a brief overview of the IBR200 router, discusses what's inside the box, and provides basic setup and installation instructions.
Navigation
Use the following links to quickly navigate through this document.
Introduction
STEP 1: Check box for content.
STEP 2: Open the SIM cover.
STEP 3: Insert an active 2FF-sized SIM.
STEP 4: Close and secure the SIM slot cover.
STEP 5: Attach the LTE cellular antennas.
STEP 6: Attach the Wi-Fi antenna.
STEP 9: Power up the router.
Step 10: Active the router in NetCloud Manager.
Help and Support
https://customer.cradlepoint.com/s/article/COR-IBR200
COR IBR200 IoT Router Quick Start Guide
Search (Knowledge Base, Forums, Cases)
Caption
FORUMS (/s/forums)
TRAINING (/s/cpu)
NETCLOUD (/s/NetCloud)
Search
Log in
1/7
Advertisement
Table of Contents
Summary of Contents for Cor IBR200
- Page 1 IBR200 IoT Router Quick Start Guide Introduction This document provides a brief overview of the IBR200 router, discusses what's inside the box, and provides basic setup and installation instructions. Navigation Use the following links to quickly navigate through this document.
- Page 2 SIM Card for Wireless Connectivity A wireless broadband data plan must be added to your Cradlepoint IBR200 series branch router for wireless broadband connectivity. Wireless broadband data plans are available from network operators such as Verizon, AT&T, Telstra, etc. The SIM card must be activated and provisioned by the network operator.
- Page 3 11/2/2020 COR IBR200 IoT Router Quick Start Guide Insert an activated 2FF-sized SIM card into the SIM slot (contacts down, notch in). The SIM card will click into place. NOTE: To remove, depress the SIM card. STEP 4: Close and secure the SIM slot cover.
- Page 4 Use wall anchors to ensure the endpoint is securely mounted. STEP 8: Connect the Ethernet cable. Connect the Ethernet cable to the port marked LAN on the back of the IBR200. Connect the other end to your cable modem. STEP 9: Power up the router.
- Page 5 COR IBR200 IoT Router Quick Start Guide Understanding LEDs The IBR200 router uses LED lights on the front panel to communicate various status conditions. Use the table below to verify the status of your router after the 1-minute bootup cycle.
- Page 6 Resources IBR200 Spec Sheet (https://resources.cradlepoint.com/product-docs/spec-sheet-cor-ibr200) IBR200 Webpage (https://cradlepoint.com/product/endpoints/ibr200/) Help and Support Cradlepoint Customer Connect Community (https://customer.cradlepoint.com/s/) Cradlepoint Support Services (https://cradlepoint.com/support/) IBR200 Router Models This document applies to the following IBR200 models: CRADLEPOINT IBR200-10M-VZ S3A748A CRADLEPOINT IBR250-10M-VZ S3A753A CRADLEPOINT IBR200-10M-B-AT S3A749A...
- Page 7 11/2/2020 COR IBR200 IoT Router Quick Start Guide CRADLEPOINT IBR250-10M-D-EU S3A915A CRADLEPOINT IBR200-10M-E-AP S3A911A CRADLEPOINT IBR250-10M-E-AP S3A916A Terms of Service Cradlepoint Terms of Service & License Agreement (https://cradlepoint.com/about-us/terms-of-service/) Privacy Policy (https://cradlepoint.com/privacy-policy/) GDPR Privacy Policy (https://cradlepoint.com/about-us/gdpr-privacy-policy/) Return to top Title COR IBR200 IoT Router Quick Start Guide...
Need help?
Do you have a question about the IBR200 and is the answer not in the manual?
Questions and answers