Canon i450 Setup Instructions page 2

6
Install the Printer Driver (Windows
1 Be sure to TURN THE PRINTER OFF.
Power Power
Button Lamp off
®
NOTE: For Windows XP or Windows
2000, log on to Windows as an
Administrator before continuing .
IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.
Close any open software applications, then
2
insert the "i450 Setup Software & User's
Guide" CD-ROM. The setup program
should run automatically.
NOTE: If the setup program does not
run, click Start, then Run, then type
D:\msetup.exe, where D is your
CD-ROM drive.
Read the License Agreement, then click
3
Yes to continue.
When the main menu appears, click
4
Install.
®
)
When the Printer Port window appears,
5
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
6 When the Terminate Installation window
appears, click OK.
NOTE: Remember to register your
product. The serial number is
located on the inside of the printer,
to the right of the print head.
7 When the Application screen appears,
click Install. Then follow the on-screen
instructions.
8 When the Terminate Installation window
appears, click OK, then Exit.
9 Click Yes if you are prompted to restart your
computer
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
6
Install the Printer Driver (Macintosh
1
Turn on your Mac and your printer and
insert the "i450 Setup Software & User's
Guide" CD-ROM.
Double-click the CD-ROM icon, then the
2
Mac OS X folder, then the Printer Driver
folder.
3 Double-click the i450 180.pkg icon.
When the "Authenticate" screen appears,
4
enter your administrator name and
password, then click OK.
5 When the "Welcome to the BJ printer driver
Installer" screen appears, click Continue.
6 Read the Software License Agreement
and click Continue, then click Agree.
7 Select a destination for the printer driver
to be installed. Then click Continue.
®
)
Click Install. When a message asking for
8
your confirmation to proceed with the
installation, click Continue Installation.
When the message "The software was
9
successfully installed" appears, click
Restart.
10 Access your CD-ROM again. From the
Application folder, double-click on the
software to be installed.
Follow the on-screen instructions. When the
11
"Installation has finished" screen appears,
click OK.
NOTE: Be sure to register your product.
The serial number is located on the
inside of the printer, to the right of the
print head.
IMPORTANT: To ensure highest
quality output, continue with Step 7
Align the Print Head.
7
Align the Print Head
1 Place a sheet of blank paper in the
paper rest.
2 Start the alignment procedure.
Windows:
a. For Windows XP/2000, click Start,
select Control Panel, Printers and
Other Hardware, then Printers and
Faxes.
b. Right-click the icon, then
Canon i450
click Printing Preferences.
NOTE: For Windows 98/Me, click
Start, Settings, then Printers. Right-
click the icon, then
Canon i450
click Properties.
c. Click the Maintenance tab, then click
the Print Head Alignment icon.
d. When asked to start print head
alignment, click OK.
Macintosh OS X:
a. Double-click the Macintosh HD icon, then
Applications folder. Double-click the
Utilities folder, then the Print Center icon.
When the Printer List screen appears,
Select
i450.
Under Printers menu, select Configure
Printer. Select i450, and click Select.
b. Click the down-arrow to select Test Print.
c. Click the Print Head Alignment icon.
Follow the on-screen instructions.
3
4 Click OK (Windows) or Send (Macintosh)
when finished.
Part no. QA7-2586-V01
40-42408-1102
© 2003 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN VIETNAM