Access Point Was Not Detected Is Displayed; Multiple Access Points With The Same Name Exist. Is Displayed - Canon PIXMA MP990 Network Setup Manual

Access point was not detected is Displayed

Check
The message appears when no access point is found.
Refer to "The Target Access Point is Not Displayed
(Detected)" on page 1.

Multiple access points with the same name exist. is Displayed

Check
The message appears when multiple access points with the
same name are found.
When you have only one access point
Select Use one AP only, then select the MAC address of
the target access point.
• For subsequent operations, go to step
Access Point's Wireless LAN Settings Directly on the Machine"
on page 7.
• For details on how to check the MAC address of the access
point, refer to the manual supplied with the access point or
contact its manufacturer.
When using multiple access points
Select Use multiple APs.
• For subsequent operations, go to step
Directly on the Machine" on page 7.
Glossary
• MAC address
A unique number assigned to each network device.
in "Entering the
in "Entering the Access Point's Wireless LAN Settings