Advertisement
Quick Links
Advertisement
Summary of Contents for A-M Systems 2100
- Page 2 INSTRUCTION MANUAL ISOLATED PULSE STIMULATOR MODEL 2100 Serial #__________ Date____________ A-M Systems PO Box 850 Carlsborg, WA 98324 U.S.A. ♦ 360-683-8300 800-426- 1306 FAX: 360-683-3525 http://www.a-msystems.com Version 12.0 March 2020...
-
Page 3: Table Of Contents
Each Isolated Pulse Stimulator is delivered complete with: Rack Mount Hardware NOTE This instrument is not intended for clinical measurements using human subjects. A-M Systems does not assume responsibility for injury or damage due to the misuse of this instrument. -
Page 4: General Description
Model 2100 cannot deliver the desired signal. WARNING The Model 2100 can produce potentially dangerous voltages up to 100 V at the output connectors. The isolated output is not connected internally to safety (earth) ground in any way. -
Page 5: Controls And Connectors
Controls and Connectors The controls for the Model 2100 are grouped in three sections: , which controls START when a pulse or burst of pulses begins; , which controls the on/off timing of one TIMING or more pulses; and , which controls the amplitude of the output signal. - Page 6 This can be used to prevent over stimulation of a tissue without requiring excessive delay between the triggering event and the stimulating pulse. 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
- Page 7 This value is independently set using a ten-turn counting dial. The PULSE AMPLITUDE: maximum pulse amplitude is the value shown on the range amplitude switch. 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
- Page 8 In the Square wave mode, the baseline disappears as long as the burst persists. 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
-
Page 9: Operating Instructions
Simple setup (and minimal instrument test) Connect the output of the Model 2100 to an oscilloscope. Before connecting the Model 2100 to any other instrument, or the experimental preparation, it is safest to turn its power off. Set the Output controls:... - Page 10 Demonstration of Burst Mode Connect the output of the Model 2100 to an oscilloscope. Before connecting the Model 2100 to any other instrument, or the experimental preparation, it is safest to turn its power off. Set the Output controls: Range:...
- Page 11 If this passes, either your experimental setup is incompatible or inconsistent; or there is a more subtle flaw in your Model 2100. If the Model 2100 appears to be malfunctioning, contact A-M Systems, Inc., or your dealer.
-
Page 12: Theory Of Operation
Theory of Operation The operation of the Model 2100 is summarized in the block diagram (see the figure on Page 11). Not shown are all of the interconnections with the microcontroller. The internal microcontroller plays an important role in setting the signal path, but does not directly contribute to the dynamic characteristics. - Page 13 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
-
Page 14: Specifications
0.25 µs error may readjusting timing controls) occur Timing repeatability < 0.01% setting + 20 ns 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com... - Page 15 Output impedance (voltage mode) Output impedance (current mode) >>10 GΩ (typically 200 GΩ) Isolation resistance >>100 MΩ 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
- Page 16 17 x 4.75 x 11.25 (inches) 43.2 x 12.1 x 28.6 cm Weight 20 lbs (9 kg) 131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324 A-M Systems Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525 E-mail: sales@a-msystems.com * Website: http://www.a-msystems.com...
-
Page 17: Warranty And Service
What are the obligations of A-M Systems under this warranty? During the warranty period, A-M Systems agrees to repair or replace, at its sole option, without charge to the Purchaser, any defective component part of the hardware. To obtain warranty service, the Purchaser must return the hardware to A-M Systems or an authorized A-M Systems distributor in an adequate shipping container. - Page 18 What are the limits of liability for A-M Systems under this warranty? A-M Systems shall not be liable for loss of data, lost profits or savings, or any special, incidental, consequential, indirect or other similar damages, whether arising from breach of contract, negligence, or other legal action, even if the company or its agent has been advised of the possibility of such damages, or for any claim brought against you by another party.
- Page 19 A-M Systems Model 2100 Manual DRW-5027100 rev 12 Revision History Date Description 6/30/06 Initial Document Control release 4/28/10 DCR201200 Warranty and company name 2/10/16 DCR 202466. Remove Calibration Instructions 11 1/18/19 DCR 202615. Review content. Correct rev, Add rev control to content 12 3/19/20 DCR 203316.
Need help?
Do you have a question about the 2100 and is the answer not in the manual?
Questions and answers