Table of Contents
Advertisement
Motherboard Manual
Smart EAR 3D
Hi-Fi 3D Audio Requirements:
1.
A chassis with front audio output jacks
2.
An earphone or a headphone
3.
Speakers
4.
Windows 7 or Windows 8 operation system
Installation Guide:
1.
Make sure the front audio cable of the chassis connected to the front audio
header of the motherboard properly.
2.
Install the Smart Ear 3D Utility from the driver DVD.
3.
Connect the earphone or headphone to the front audio jack of the chassis for
Smart Gain and 3D Sound Field functions.
4.
Connect the speakers to line out port (green color) of rear panel for Smart
PREAMP function.
Note: If you want to use an AC'97 front audio output cable, please disable the "Front Panel Jack
Detection" setting. This setting can be found via O.S. Audio Utility.
22
Advertisement
Table of Contents
