Summary of Contents for Just Kampers JKF50
- Page 1 JKF50 FRIDGE FREEZER FITTING GUIDE INSTALLATION GUIDE SWAPPING THE DOOR OPENING SIDE BUY ONLINE AT JUSTKAMPERS.COM...
- Page 2 200mm Before fitting, line the unit up and dummy fit to the space Ensure your JKF50 has been kept upright, on a level for the appliance. Remember to leave specified gaps to ensure surface for 6 hours prior to installation.
- Page 3 JKF50 FRIDGE FREEZER FITTING GUIDE INSTALLATION BEFORE YOU INSTALL – Ensure the power is disconnected from your leisure battery. Remove the fuse from the fridge wiring. Cut the fridge wiring to a length that is manageable for the install. CAUTION: Make sure you have enough, you can always cut more! Then the connection should be crimped, use a heat gun to shrink the connector to the wiring.
- Page 4 JKF50 FRIDGE FREEZER SWAPPING THE DOOR OPENING SIDE DOOR REMOVAL Take a few minutes to take a look at the fittings on each side (top & bottom) plus the handle on the door. Remove the top panel on the fridge by unscrewing the 3 screws on top of the control panel.
- Page 5 JKF50 FRIDGE FREEZER SWAPPING THE DOOR OPENING SIDE DOOR REPLACEMENT Attach the hinge bracket with the Attach the non-hinge bracket with two screws to the left hand side of the two screws to the right hand the base of the fridge.
Need help?
Do you have a question about the JKF50 and is the answer not in the manual?
Questions and answers