Advertisement
2. INTRODUCTION
Portable, rechargeable floodlight with built in high quality wireless speakers, which can be easily connected to your smart phone or tablet to
play music. Die-cast aluminium housing with handle and integral 180° adjustable stand. Features a removeable battery pack which includes a
Powerbank, LED torch and battery charge level indicator. Main floodlight with on/off power button with five brightness options, from 100lm up to
2000lm. Built-in memory function for brightness. Light and speakers can be used whilst charging. Supplied with charger. IP65 Rated.
3. SPECIFICATION
model no ..............................................................LED200WS
Battery ...........................................................7.4V 4Ah Li-ion
Charging time .................................................................4.5hr
Running time .............................................................1.5-30hr
LED Qty. ........................................................... 1 x 20W COB
Lumen output ...................................................... 100-2000lm
USB output ................................................................. 5V / 1A
Weight ........................................................................... 1.5kg
The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances
we will not replace the battery regardless of whether it is less than one year old.
Note: The lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without
another charge.
4. OPERATION
WARNING! Ensure that the safety instructions are read and fully understood before use.
‰
4.1.
CHARGING
4.1.1.
Charge the battery before use. Only use the charger supplied. The Battery level indicator, fig.1.3 and fig.3 indicates charge level.
fig.1
4.2.
WIRELESS CONNECTION refer to fig's 1 & 2
4.2.1.
Press Wireless On/Off button, fig.1.11, once to turn on wireless connection, press again to turn off.
4.2.2.
The device will sound, 'Ready to pair' and once paired, 'Your device has paired sucessfully.'
NOTE: The Wireless connection will turn off after 2 minutes with no connection being made.
4.2.3.
The Wireless name is: 'LED WORKLIGHT'.
4.2.4.
Adjust the volume using the Brightness (+) and (-) buttons, fig.1.8 and fig.1.10.
4.3.
MAIN LIGHT
4.3.1.
Press Main Light button, fig.1.9 once for on and again for off.
4.3.2.
Press Brightness + button, fig.1.8 to increase the brightness and Brightness - button, fig.1.10 to reduce the brightness.
4.3.3.
The memory function will turn the light back on to the level it was at, when it was last turned on.
© Jack Sealey Limited
Original Language Version
1 Powerbank
2 Powerbank release button
3 Battery level indicator
4 Torch On/Off
5 Powerbank On/Off
6 USB Output
7 Charger port
8 Brightness +
9 main Light On/Off
10 Brightness -
11 Wireless On/Off with Indicator light
fig.2
LED200WS | Issue:1 12/03/19
Advertisement
