Advertisement
Installing AV-Link
1
Attach AV-Link to AV-30
Attach the AV-Link to the back of
the AV-30 by inserting the unit
into the DB-15 connector on the
back of the AV-30.
2
Tighten Jack Screws (2x)
Using a 3/16" nut driver, tighten
the two [2] Jack Screws to 5 in-lbs
max. DO NOT overtighten.
3
Reattach original
back-shell connector
Using a flat screwdriver, tighten
the two [2] screws to 5 in-lbs max.
DO NOT overtighten.
1
Advertisement
