Lcd Messages - Canon imageCLASS MF3110 Basic Manual

LCD Messages

The following messages are displayed in the LCD when the machine performs a
function or if it encounters an error.
ADJUSTING
WAITING TO SCAN
Cause
Remedy
CHECK PAPER SIZE
Cause
Remedy
9 CHECK PRINTER
Cause
Remedy
CHECK PRINTER COVER
Cause
Remedy
INSTALL CARTRIDGE
Cause
Remedy
9-8 LCD Messages
The machine is not ready for copying because you have just connected the
power cord to the machine.
Wait for a while. The machine cannot scan documents for copying immediately
after the power cord is connected.
The size of the paper in the cassette or multi-purpose feeder is different from
that of the paper specified in <PAPER SETTINGS> of the Menu.
Load the correct paper size or change <PAPER SIZE> in <PAPER SETTINGS>
of the Menu. (See "Loading Paper," on p. 2-4, or "Specifying the Paper Size," on
p. 2-11.)
Then reset the machine by opening the front cover and then closing it.
A problem has occurred in the printer.
Reset the machine by opening the front cover and then closing it. If the
message persists, unplug the machine from the power supply and contact
Canon Authorized Service Facilities or the Canon Customer Care Center.
The front cover is not closed completely.
Check the front cover, and make sure that it is completely closed.
The cartridge is not installed or not installed correctly.
Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-13.)