Checking The Focus - Canon Powershot SD1300 IS User Manual

Checking the Focus

You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.
Press the l button, and switch
to the focus check display (p. 44).
A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward k once.
●
The screen shown to the left will appear.
Press the m button to move to a different
●
frame when multiple frames appear.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
Pressing the n button resets the
●
display to Step 1.
97