Aike AK1205 User Manual

1. The unit includes electronic devices and solenoid valve, please do not knock.
2. Caution for connecting line hen disassembling the unit.
3. Please it using soft cloth th neutral detergent hen cleaning the
product. Next detergent and dirt by the
CAUTION
dried soft cloth to dry.
4. Please do not shing th tering or using some detergent
such as scouring and laundry detergent, also do not using diluent,
detergent th high acid or Nylon brush to clean this product, lest to damage
surface or erode internal electronic components, especially be careful not to
damage transparent cover hich placed induc
ctiveness of reaction. Tips: Ensure the distance bet
and counter top is above 35cm When installing on stainless steel counter top.
Installation

Using Your AK1205

Key
Cap
Sealing Cap
Liquid Button
Fixed Bracket
Indicator
1. Insert the key into the lock to
2. Open the sealing cap and pour the
open the top cover after install
liquid soap, remove the extra over
the battery
Children should be used under adult supervision to prevent accidentally eating!
c
The unit has bee
WARNING
After installing the batteries, t
The unit is suggested to install batteries even if you don't use it, so that the unit can automatically
run once per 72 hours in the standby status to avoid the catheter pressure adhesion.
Some of unit had installed batteries and in dormant status before delivery. Keep press setting
CAUTION
buttons for more
Whereas if the unit turn to dormant status after keeping press the setting button, you can also
re-installation batteries to turn the unit to standby status directly.

Liquid Adjustment

At the standby status, you can adjust liquid by pressing the liquid adjustment button.
The default liqui
per press. Totall
ung-out soft cloth, then using
may have a slight deviation.
h particle
to avoid decrease the
sensing

Troubleshooting

Problem
LED indicator o
h
Indicator on
d
supply
liquid
supply
Tips: Please prevent debris from entering the container to avoid blocking.
3. Put your hand under the sensor
until the liquid sprayed out
Specification
u .
Model
Volume
Dimension
s in the standby state. Net Weight
turning into standby status.
crease around 0.5ml output for
o
Liquid adjustment button
Indicator
Reason Potential Solution
Replace the controller
Control system trouble
Check the Circuits and batteries
m
Re-install or replac e the batteries
Batteries r
Check the Circuits
Circuits problem or poor contact
Clean the indicator
Block sight of indicator
Replace the batteries
r
Remove the sensing object
g
Contact the the dealer
Out of sensing distance
Contact the the dealer
Unit fault
Adjust the liquid output
Short liquid supply time
Reduce liquid viscosity
Too viscous liquid
Try some times or contact the dealer
Liquid coagulation or obstruction
P r AA Batteries
Sensing Distance
Liquid Supply 5 step adjustment
Temperature
Automatic Soap Dispenser 丨 AK1205
USER MANUAL
Zhejiang AIKE Appliances Co.,Ltd.
Add: Yong'an Industry Zone, Taizhou, Zhejiang
E-mail: sales@zjaike.com
T
Website: m