Connecting The Camera And Computer To Load Images - Canon Powershot Pro70 Software Manual

Connecting the Camera and Computer
Now that you have finished installing the required software, connect the
camera to the computer and try your hand at uploading images. Use the IFC-
100MC interface cable to connect the camera to your Macintosh.
• When connecting these devices, always ensure that the computer is shut off and
the camera's mode dial is set to lock.
• Since transferring files between the computer and the camera is relatively power-
intensive, it is advisable to power the camera with an AC power source.
1. Turn off the computer and set the camera's mode dial to lock.
2. Open the camera's terminal cover and connect the IFC-100MC
interface cable to the digital terminal.
Terminal Cover
Digital Terminal
3. Connect the other end of the cable to the computer's modem port or
printer port.
Printer Port
28
Mode Dial
Modem Port
Connect the interface
cable to the printer or
modem port.
IFC-100MC
Interface Cable
IFC-100MC
Interface Cable