Checking the Focus
You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.
Select [Focus Check].
Press the n button, select the 1 tab
●
and [Info Disp.].
Press the qr buttons to select [Focus
●
Check], then press the n button.
A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Pressing the m button will switch to a
●
different white frame.
Change the magnification level or
location.
Press the zoom button toward k.
●
●
Press the zoom button to change the
display size, and press the opqr
buttons to change the display position
while checking the focus.
Pressing the n button resets the
●
display to Step 2.
89