AURES PS-400 Quick Start Manual

Step 1 : Connect the Cradle to the host computer via its USB
cable

Step 2 : Activate the scanner

To configure the scanner, press the Scan button and point the
Universal 2D Bluetooth
scanner at below code to set the scanner to the Bluetooth-HID
Scanner
(keyboard) mode. The scanner will beep three times quickly
and the LED will flash green when read correctly. The scanner
PS-400
mode is now set.
Quickstart Guide

Step 3 : Language Setting

(please hide the unused barcodes before scanning to improve
its reading accuracy)
For French,
For German,
For English,

Step 4 : Set for automatic Bluetooth reconnection

Scan all below barcodes from top to bottom.
Rel. 1.0 Jul20

Pairing Scanner Procedures

ZZ
CA99
ZZ

Step 5 : Select the AURES BT Scanner in Windows

Press the Clear/Function button for about three seconds until the LED
blinks blue. The scanner is now in the Bluetooth pair mode.
To connect the scanner to your computer using Bluetooth, use the
following steps:
(1) Open Settings.
(2) Click on Devices.
(3) Click on Bluetooth & other devices.
(4) Turn on the Bluetooth toggle switch.
(5) Click the Add Bluetooth or other device button to connect a new
device.
(6) Select the Bluetooth option.
(7) Select the AURES BT Scanner.
(8) The scanner will beep once when paired successfully. It will then
show up on the list of devices in Windows.
To test if the scanner works, open the Windows Notepad and scan
below UPC code for verification.