English Warnings It is most important that this instruction book should be retained with the appli- ance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Page 4
This appliance is heavy. Care should be taken when moving it. Ice lollies can cause frost burns if consumed straight from the appliance. This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Never use metal objects for cleaning your appliance as it may get damaged.
If this appliance which features magnetic door seals is to replace an older appliance having a spring-lock on the door or lid, ensure that the spring lock is unusable before discarding the old appliance. This will prevent it from becoming a death-trap for a child. Installation Location Place the appliance as far away as possible from sources of heat, e.g.
Instructions for the installer Door reversibility Inner door reversal Using a screwdriver, release bracket (1). Unscrew the bracket support (2) and fit it on the opposite side. Remove the door. Unscrew the door stop (3) and screw it on the opposite side. Remove the upper bracket of the door (4) and insert it on the opposite side.
Building-in instructions Recess dimensions Height 1780 mm Depth 550 mm Width 560 mm 50 mm min. For safety reasons, minimum ventilation must be as shown in Fig. 3. Attention: keep ventilation openings clear of obstruction.
Page 8
Installation of the appliance in the recessed area Ø 2,5 – Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration); – Fix the square fitting (1) to the appliance and apply the rubber seal; – Fit the refrigerator into the space recessing it by 48 mm in relation to the unit base (Fig.
Page 9
Position the runners (C) on the inside of the kitchen unit as shown in Fig. 7 and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws. Open both the appliance door and that of the kitchen unit to approx.
Instructions for the user Refrigerator compartment description Start-up Insert the plug into an earthed socket. Temperature adjustment / Stop The temperature is adjusted by means of the knob placed inside the refrigerator. If the knob indicates «O», the appliance is switched off.
Page 11
Food refrigeration Before loading the food, let the refrigerator run empty for about 4 hours, setting it on a very low temperature. Do not fill the shelves completely. Cool air must be allowed to circu- late freely. Do not put warm or hot foods into the refrigerator. If the surrounding temperature is low and the thermostat knob is set on high numbers, the temperature in the refrigerator com- partment could drop below zero.
Cleaning and maintenance of the refrigerator compartment Before carrying out any cleaning or maintenance operations, unplug the appliance or turn the thermostat knob to position «O». We recommend using a normal domestic detergent for cleaning; remove all food, prefera- bly when the refrigerator compartment is not very full, clean the compartment and reset the thermostat knot to the required position.
Page 13
6) Do not place bottles in the freezer compartment, except for high alcoholic content liquids, because they can burst. 7) Do not use the freezer compartment to cool hot foods. This causes unnecessary frost formation. Warning! Defrosted foods cannot be refrozen. Prepare fresh food to be frozen in small portions suitable to be consumed in one meal.
Stopping, cleaning and maintenance Unplug the appliance before carrying out any maintenance operation. Warning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Never use metal objects for cleaning your appliance as it may get damaged. Whenever the appliance is not to be used for an extended period of time: –...
The appliance does not cool. a) Check whether the electric plug in inserted in the socket. b) Check current is present in the circuit by plugging in a table lamp. c) Check whether the fuse is damaged (switch on the light or connect another device). Traces of water found in the refrigerator compartment bottom.
Need help?
Do you have a question about the AKE 8130 IW and is the answer not in the manual?
Questions and answers