Canon DIGITAL IXUS V2 User Manual page 130

128
List of Menu Options and Messages
List of Messages Displayed while a Direct Print Function
Compatible Bubble Jet Printer is Connected
The following messages may appear on the camera's LCD monitor while
a direct print function compatible Bubble Jet printer (sold separately) is
connected.
Please also check the Quick Start Guide for the Bubble Jet printer,
checking the error number displayed on the printer's control panel
against those listed in the guide.
Printer in use
Printer warming up
No printhead
Printer cover open
Media type error
Paper lever error
Low ink level
Waste tank full
Printer error
Printer is busy printing from a memory
card in computer or printer. Printer will
automatically start printing from camera
when the current print queue empties.
Printer is warming up. When it is ready,
the printer will start printing automati-
cally.
No printhead installed in printer.
Secure the printer cover.
You selected a paper type incompatible
with the printer. Select a compatible
paper type in the Print Style menu.
Adjust the paper selection lever to the
proper position.
Ink tank needs replacement soon.
Prepare a new ink tank. Select [Continue]
in the error message to resume printing.
Restart printing by pressing RESUME/
CANCEL button on printer, but request
a replacement waste ink tank from your
retailer or service center (see printer
Quick Start Guide) soon.
Turn printer off and on again. If error
persists, consult service center listed in
printer Quick Start Guide.