Advertisement
4.4.
REMOVE DRAWERS (refer to fig.3).
4.4.1.
Pull drawer out until it is almost fully extended. Push up one black release handle, while pulling down the other hand black release
lever.
4.4.2.
Whilst holding the levers in these positions pull the drawer out until it is released from the drawer slide.
4.5.
REPLACE DRAWERS
4.5.1.
Extend the drawer slides from the tool chest/cabinet.
4.5.2.
Insert the brackets on each side of the drawer into the slots in the chest/cabinet slides, being careful that they are properly positioned.
4.5.3.
Once properly inserted, completely close the drawer to set the slides in their proper positions.
4.6.
RAISE AND RELEASE DRAWER HANDLES (refer to fig.4)
4.6.1.
These units are equipped with raise and release drawer handles.
4.6.2.
To open, lift up the drawer handle, whilst pulling it towards you. To close, shut the drawer firmly, until the latch engages.
4.6.3.
If the drawer does not stay closed, the hook may be bent or it may rub against the drawer slides. To fix lightly bend the hook until the
drawer will engage in the slide.
4.7.
CHEST AND ROLLCAB CONNECTION (refer to fig.5) Rollcab PTB67506SS can be fitted with Topchest PTB66004SS or PTB660TR.
4.7.1.
Place the chest on the rollcab.
4.7.2.
Attach the connectors, as shown, to both ends. Ensure that the clip fully engages in the back of the topchest.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.3
Parts support is available for this product. Please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
01284 703534
Original Language Version
Fig.5
sales@sealey.co.uk
PTB66004SS, PTB67506SS
fig.4
www.sealey.co.uk
Issue: 3 (H,2,3,F)
05/06/19
Advertisement
