Advertisement
5. OpERAtION
5.1.
Open filling cap and fill with oil to be dispensed, fig.1.
5.2.
Select appropriate adaptor for the vehicle.
5.3.
cONNEct thE ADAptOR tO thE DISpENSING hOSE
5.3.1.
Unscrew nut from end of dispensing valve assembly, fig.2.
5.3.2.
Insert required adaptor and slide dispensing valve nut (and seal) over the adaptor and tighten.
5.4.
Open valve.
5.5.
Push/pull the handle to dispense the oil, extend foot to aid stability whilst pumping.
6. MAINtENANcE
6.1.
Wipe down after use. DO NOt use solvents.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENt pROtEctION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business park, Bury St Edmunds, Suffolk. Ip32 7AR
01284 757500
© Jack Sealey Limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
www.sealey.co.uk
VS7009.V2 | Issue:1 12/08/19
Advertisement
