Sealey AK4567D Quick Start Manual

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
instruction eye
manual protection
1. saFetY
WarNiNG! Ensure health & safety, local authority, and general workshop practice regulations are strictly adhered to when using this
‰
equipment.
Familiarise yourself with product application and limitations, as well as the specific potential hazards peculiar to this product.
9
Maintain the hose reel in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use genuine parts only. Non authorised parts will invalidate the warranty.
9
Use only lubricants up to SAE 150 viscosity and antifreeze liquids.
9
Ensure safety eye protection and protective clothing are worn when using this product.
9
Remove ill fitting clothing. Remove ties watches rings, other loose jewellery and contain and/or tie back long hair.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
9
Keep children and unauthorised persons away from the working area.
9
After use, drain any fluids from the equipment before storage.
9
Dispose of waste liquids in accordance with local authority regulations.
9
Disconnect air pressure from equipment when not in use.
9
Do Not exceed the maximum working pressure of 2000psi.
8
Do Not leave the hose on the ground, retract when not in use.
8
Do Not point attachments at people or animals.
8
Do Not use the equipment near open flames.
8
Do Not smoke whilst using this equipment.
8
Do Not use with corrosive fluids.
8
Do Not dismantle, tamper with or adapt the reel for any purpose other than for which it is designed.
8
Do Not use the unit if it has been dropped or mishandled, check the unit to ensure there is no damage.
8
Keep the equipment clean and store in a safe dry, childproof location.
9
WarNiNG! Do Not dismantle the hose reel casing. To do so may result in damage to the appliance and/or personal injury and will
‰
invalidate the warranty.
WarNiNG! Do Not allow uncontrolled discharge of fluids thus polluting the environment. All liquids must be disposed of according to
‰
local authority regulations.
2. iNtroDuctioN
For use with AK4560D pump station. Heavy-duty steel and powder coating finish for corrosion resistance. Four roller fairlead allows smooth
running of hose whatever the angle of hose or mounting position of reel. Multi position ratchet lock with fully enclosed spring. Includes 1.5mtr
connection hose for connecting reel to pump.
3. speciFicatioN
model no: ................................................................AK4567d
Hose inlet/outlet: .......................................................1/2"BSP
Hose length: . .................................................................10mtr
Hose size (ID): .................................................................1/2"
max. pressure: ...........................................................2000psi
Weight: . ..................................................................... 18.14kg
4. mouNtiNG
4.1. Mount the reel to a wall or bench using appropriate fixings (not supplied).
4.2. Connect the 1.5mtr hose from the centre reel connection to the AK4560D
pump station.
4.3. Connect a dispensing gun/meter to the outlet connection.
4.4.
4.5.
4.6.
4.7.
© Jack Sealey Limited
oil hose reel retractable 10mtr
model no:
Wear
Wear
protective
protective
clothing
gloves
Original Language Version
aK4567D
AK4567D | Issue:2 (H,F) 16/04/18