1 Preface This instruction manual must be read by the operating s taff and the pers ons res pons ible for t he maintenance of the appliance prior to start-up and is an addition to the training material. Any damage caus ed by non-adherence t o t he in structions giv en in this m anual will not b e covered by our warranty.
T he b oo t dr ye r i s o nly i nt en d ed fo r dr yin g an d s to r i ng b oo ts. In the event that any of the above instructions are not adhered to, WINTERSTEIGER will refuse any liability for any damage caused! INNOVA...
3 Function • Easy operation with analog timer • Central heating, adjustable in 2 steps • Air outlet only for occupied nozzles • Air-circulation system disinfects and filters the used air and supplies the central ventilator with the clean air. •...
Never push any object into the extractor fan grid of the boot dryer or even cover it up in any way (do not obstruct the dryer)! • To ensure that INNOVA operates properly, it must be put in a place where ambient tempera- ture never falls under 18°C. INNOVA...
6 Description of the operating elements Main switch manual - automatic mode: • Manual mode The circulating fan and the disinfection are activated. • Off Switching off of the machine. • Automatic mode The drying and disinfection of the boots are done by the pre- set time on the timer.
To dry the boot place it exactly as shown in the picture (1), whether the boots are for downhill, cross-country skiing or others. • If the boot dryer is being used for boots whose weight is not enough to activate the nozzle on the dryer head, undo the spring as shown in picture (2). Picture 1 Picture 2 INNOVA...
7.2 Operation • Check the level of the air deodorant granules. • Plug in the appliance. • Switch on the power to the dryer by means of the switch (A) and select manual or automatic mode. Check the adjustment of the timer when automatic mode was selected. •...
Clean the frame (C) and the valves (D) regularly with a damp cloth. • Remove the dust from the inside of the ventilators yearly by opening of the front cover (E). Do not clean the appliance with a high-pressure cle- aner! INNOVA...
9 Trouble shooting Error Cause Remedy The appliance does not work The dryer is not connected. Plug in the plug for the power supp- The main switch was adjusted to „0“ Switch on the main switch The automic/manual switch is on Set the automatic/manual switch to the „0“...
Need help?
Do you have a question about the WS-INNOVA5 and is the answer not in the manual?
Questions and answers