Advertisement
dO nOt site the heater below an electrical socket outlet.
8
dO nOt use the heater without the grille fitted.
8
dO nOt use the heater out of doors. These heaters are designed for indoor use only.
8
dO nOt cover heater when in use, and do not obstruct the air inlet and outlet grill s.
8
dO nOt place heater too close to yourself or any object, allow the air to circulate freely.
8
dO nOt touch the outlet grille of the heater during and immediately after use as it will be hot.
8
2. intrOductiOn
Features PTC heat conducting ceramic elements to achieve an instant, odour free heat. Ambient room thermostat maintains temperature at a
pre-set level. Ideal for industrial applications with two heat settings or fan only. Supplied with 3-phase power cable and plug.
3. specificatiOns
model no:..................................... ...........................PeH9001
Power Settings: ............................ ......................6000/9000W
Supply: ....................... ...................................415V/3ph - 16A
Heated area ................................................................. 180m³
4. heater OperatiOn
4.1.
Place the heater on a level floor in the area you require to heat. Allow a minimum of 2mtr between the heater and adjacent objects.
4.2.
Plug the heater into the mains supply and select the required output by using the rotary switch on the top of the heater, see fig.1. The
settings are fan only, half heat, full heat. The thermostat is operated by the second knob.
4.3.
To switch the unit off, select "0". Allow the unit to cool before handling or storage.
WarninG! dO nOt touch the top of the heater when in use as it becomes hot.
‰
WarninG! Always allow elements to cool before moving the units. Use only on a smooth even surface.
‰
5. Maintenance
WarninG! Before attempting any maintenance ensure the unit is unplugged from the mains power supply, it is cool and on level
‰
ground.
dO nOt use the heater with out the grills fitted.
8
5.1.
Sealey recommend that repairs are carried out by a qualified electrician.
Weee reGulatiOns
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
envirOnMent prOtectiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PeH9001 | Issue 3 (eRP) 07/08/19
Advertisement
